Characteristics of joint bearings (3)

Home>Bearing knowledge>Features of joint bearings (3)
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Characteristics of joint bearings (3)

Source: Bearing network time: 2014-04-25

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
6. Self-lubricating angle touch joint bearing
The outer ring of GAC...F type is hardened bearing steel, the sliding outer surface is glass fiber reinforced plastic with PTFE as additive, the inner ring is hardened bearing steel; the sliding outer surface is plated with hard chrome. It can accept radial load and one direction. Axial (combined) load.
7. Self-lubricating thrust joint bearing
The GX...F type seat ring is hardened bearing steel; the sliding outer surface is glass fiber reinforced plastic with PTFE as additive; the shaft ring is hardened bearing steel; the sliding outer surface is plated with hard chrome. It can accept axial load in one direction. Or combined load (the radial load value at this moment shall not be greater than 0.5 times the axial load value).
8. Self-lubricating rod end joint bearing (1) SI...C type is the assembly of CE...C type bearing and rod end. The rod end is internally threaded; the data is carbon structural steel. It can accept the direction constant load. The load can together accept axial loads in either direction less than or equal to 0. 2 times the radial load.
(2) SA...C type is the assembly of CE...C type bearing and rod end. The rod end is externally threaded; the data is carbon structural steel. It can accept the load with the same direction. It can accept the radial load together. A direction less than or equal to 0. 2 times the axial load of the radial load.
(3) SI...CS-2Z type is the assembly of GE...CS-2Z bearing and rod end. The rod end has internal thread; the data is carbon structural steel. It can accept either direction less than or in combination with radial load. Axial load equal to 0. 2 times radial load.
(4) SA...CS-2Z type is the assembly of GE...CS-2Z bearing and rod end. The rod end is externally threaded; the data is carbon structural steel. It can accept the direction constant load. Under the radial load Together, it can accept axial loads in either direction less than or equal to 0. 2 times radial load.
(5) SIB...C type rod end with internal thread; the data is carbon structural steel; the sliding surface is sintered bronze composite material, the inner ring is hardened bearing steel; the sliding outer surface is plated with hard chrome. It can accept the radial direction unchanged. Load.
(6) SAB...C rod end with external thread; the data is carbon structural steel; the sliding surface is sintered bronze composite material, the inner ring is hardened bearing steel; the sliding outer surface is plated with hard chrome. It can accept the radial direction unchanged. Load.
(7) SIB...F type rod end with internal thread; data is carbon structural steel; sliding surface is made of glass fiber reinforced plastic with PTFE as additive, inner ring is hardened bearing steel; sliding surface is hard chrome plated Can accept radial loads with constant direction.
(8) SAB...F type rod end with external thread; the data is carbon structural steel; the sliding outer surface is made of glass fiber reinforced plastic with PTFE as additive, and the inner ring is hardened bearing steel sliding surface with hard chrome plating. Can accept radial load with constant direction.
(9) SQ...L type is made of special self-lubricating alloy material; it can accept radial load and small axial load in either direction.

Recommend to friends comments close window

Bearing related knowledge
The effect of the bearing bracket and the layout characteristics of the oscillation screen rolling bearing attack oscillation reasons which determine the "INA bearing can be available" method
The focus of KOYO bearing selection The analysis of imported bearings can not reach the extra life


This article links to http://
Please indicate China Bearing Network http://

Previous:The reason for the FAG bearing grinding 蜕 change layer: The details of the "rolling bearing"

Product advantages:

1. 100% fresh aluminum alloy 6063-T5, iron containing is less than 2% , sturdy and durable, full thickness 3.0mm.

 

2. 3 layer PVDF color coating, thickness more than 80 microns, excellent weather resistance, never fade,More upscale appearance.


3. 100% fresh virgin Bayer Polycarbonate Sheet, 30-50 micron anti-UV coating, can withstand 75% ultraviolet light, impact strength is 300 times that of ordinary glass, 10 years warranty.

 

4. The motor adopts the domestic leading brand and is guaranteed for 10 years.


5. Rugged and novel internal design, 3.0mm thick aluminum alloy profile, 4-10mm high strength impact resistant endurance board, can withstand snow loads of 30 to 45 cm.

 

6. High anti-aluminum structure provides maximum safety even in strong winds (strongest 12 winds) (34m / s strong wind).

Novel structure and easy installation


7. Packaging, protecting the product during shipping and making it easier to install.

Low Line Pool Enclosures

FOSHAN KASO BUILDING MATERIAL CO.,LTD , https://www.kasocover.com