If quality is the life of an enterprise, then the standard rule is the soul of the entire industry. With the rapid development of the market, there will inevitably be various problems. If a reliable standard rule is not formulated, it will not be able to restrain the market, and it is not conducive to the sound development of the entire industry. In 2013, the home furnishing industry introduced and implemented several new standards, such as â€œRegulations on the operation of the home industryâ€ and â€œGeneral technical conditions for mahogany furnitureâ€. So what new standards are there to meet in 2014? Furniture has added new standards to protect furniture in the past. In addition to environmental monitoring and material testing, there has not been a test standard for â€œnot strongâ€. In the past consumer complaints, there were often cases where the closet collapsed, the chair and the leg were broken. In fact, the furniture is not strong enough to carry multiple objects. No matter what kind of material is used, it must be tested by the general technical standards of mechanics. Since May 2014, the new national standard for the "Mechanical Performance Test of Furniture" will be officially implemented, which involves the strength, durability and stability of furniture such as tables, benches, cabinets and single-layer beds. In the past, consumers were unable to verify that furniture was strong. After the implementation of the new national standards, consumers could view experimental data on the mechanical properties of furniture. 2014 new home standards frequently added furniture and new protection faucets will be mandatory inspection in 2013, the shadow of the lead lead exceeded the standard has been shrouded everyone. Just after entering the 2014 horse year, the lead in the faucet exceeded the standard and continued to appear. Even the first-line international big names did not escape. Many consumers are very disappointed that the high-end faucets that consumers buy to ensure high quality are not up to standard. Just recently, the relevant person in charge of the General Administration of Quality Supervision, Inspection and Quarantine revealed that the latest revised national standard for the faucet industry, â€œCeramic Sheet Sealing Water Nozzleâ€, has made clear limits on the amount of heavy metal precipitation in faucets. Currently, the standard is seeking opinions from relevant ministries. The National Standardization Management Committee will release the implementation as soon as possible. The biggest change is to include the heavy metal content of the nozzle in the mandatory detection range. The detection of more than ten heavy metals such as antimony, arsenic, antimony, antimony, boron, cadmium, chromium, copper, mercury, selenium and tellurium is also included in the national standard. For the lead element that has received much attention, the news said that the new national standard stipulates that the lead precipitation standard of the faucet is 5 g/L. This standard can be called the "most stringent in history" standard. Air purification should also be regulated because of the aggravation of smog problems, which once ignited the sales of air purifier products. October 10th of each year is also designated as World Health Day. In the market, various types of steam purifiers of various types of hoes occupy the eyes of consumers. It is understood that only the "Electrical Safety Standards" and "Antibacterial Sterilization Standards" are mandatory in the previous national standards, while the "Purification Performance Standards" are recommended, which makes people suspicious: the purification performance of these products Is there really a business that is so high? In the first year of 2014, the National Standards Committee announced that it has initiated the revision of the existing air purifier national standard GB/T 18801-2008 "Air Purifier". The new standard has improved the technical indicators and refinement test methods for different pollutants, and increased the conversion method of applicable area and air cleansing quantity, which will provide a basis for consumers to purchase related products. Formaldehyde testing does not need to "open the belly" In fact, formaldehyde testing of furniture is nothing new, but there are still very few consumers who are suspected of having their furniture formaldehyde exceeded the standard - the reason is very simple, because the formaldehyde detection of furniture Most need to destroy the furniture, the test needs to spend money, and the furniture that is bought at a big price is also destroyed, which will inevitably make people feel bad. It is understood that since 2014, the National Standard for the Limitation of Hazardous Substances in Wood Furniture (Revised) has been drafted. According to the new standard, the future furniture can be put into the environmental climate chamber for hazardous substance testing. After the inspection, the furniture will not be destroyed. continue to use. The National Furniture and Indoor Environmental Quality Supervision and Inspection Center will add non-destructive testing methods. >>>Back to Home Nanchang Decoration Nanchang Decoration Forum
Sodium lignosulfonic Acid Sodium Salt is sodium ligninsulfonate is a natural polymer, anionic surfactants. Has a strong dispersibility, suitable for the solid dispersion in the water medium. Due to the different molecular weight and functional groups have different degrees of dispersion, can be adsorbed on the surface of a variety of solid particles, can be metal ion exchange, but also because of its organizational structure of the existence of a variety of active groups, which can produce condensation or And hydrogen compounds with other compounds. In industry, Sodium Lignosulfonate is widely used as a dispersant and wetting agent. Dyeing industry used in the dispersant -NNO is sodium lignosulfonate as the main Raw Material compound.
Sodium Bisulfite,Sodium Lignosulfonate,Sodium Lignosulphonate,Sodium Metabisulfite
FORING IMPORT & EXPORT CO.,LTD , https://www.foringfor.cn