In August 2012, China's first national standard for children's furniture, General Technical Conditions for Children's Furniture, will be officially implemented. The introduction of this standard will end the current status of a national standard for children and adults. To this end, Xiaobian visited the Chongqing market and found that many children's furniture brands do not have much "action". Even the salespersons of children's furniture brands do not know this standard, and most random interview consumers also said that this child The appearance of the new national standard for furniture is not known. The business did not move. On July 7, the reporter came to the Red Star Macalline in Chongqingâ€™s North Ring. When visiting the children's furniture market, the reporter found that most children's furniture brands did not have any "actions" because of the introduction of new standards, and even many children's furniture brands did not participate in the group purchase activities of Red Star Macalline. The reporter saw a couple in a children's furniture brand store who chose to choose children's furniture for her daughter. They told reporters that they learned from the media earlier that Red Star Macalline is doing group buying activities today. Thinking about the children's furniture brands of Beihongxing, they should also participate in the promotional group buying activities of the store, so they came over early in the morning. . But to the disappointment of the couple, most of the children's furniture in the store did not participate in the promotion. Therefore, the retail part of children's furniture is much more deserted than other promotional businesses. Only a few parents are buying for their children. Some children's furniture brands even don't even see the salespersons. When it comes to decorating a room for a baby, the couple said they are particularly concerned about environmental protection and safety. When you choose, you must smell it with your nose, and you need to provide a quality inspection report. At the same time, when purchasing the shape of the furniture, pay special attention to choosing some desks and bedside cabinets without sharp edges and corners. However, for the new standard of children's furniture mentioned by the reporter, the husband and wife said they did not know. When the reporter told the husband and wife that the new standard on the formaldehyde index of children's furniture, environmental safety and the specific rules of sharp edges and corners of the furniture, the husband and wife said that they were very happy, saying that after August, they would "supervise" the "action" of the merchants. Consumers are not aware that this year is the Year of the Dragon, and many couples are rushing to give birth to dragons in this lucky year. So do they know this standard for this group of â€œparentsâ€ who are about to arrange a children's room, or are already setting up a children's room? How do they view this standard? To this end, the reporter randomly interviewed several consumers who are about to be parents or parents. Most consumers interviewed by reporters said they did not hear about the implementation of this standard, but they are all supportive of the implementation of this standard. In the face of a dazzling array of children's furniture, many consumers can only purchase through brand reputation and in large formal shopping malls. A consumer who is a decoration industry himself, who has just become a father, said in an interview with reporters: "For children's furniture, first, I choose to make the choice and order of the plate myself; second, or I will buy Buy sample furniture that has been in the store for a while. Because the evaporation period of formaldehyde takes several months, buying a sample is less harmful to the child than the new one.â€ However, for most, there is no home improvement. For experienced parents, how to buy Anxin's children's furniture is still a big problem. Consumers hope that the implementation of the new standard for children's furniture will make consumers feel comfortable buying.
10W Mini Glue Gun Ptc Heating Features:
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc. Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of
standards to ensure a robust and long life, we hope it provides you with many
years of trouble-free, safe and reliable service.
General Safety Information:
if the plug cord was in good condition, and if there is stand before plug into
the electrical outlet ; Check if the used glue gun has glue flow through back
of the tunnel;
5-10 minutes to allow glue to soften, stand up the glue gun on the table when
not in use;
nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop
4. If the glue could not flow from the nozzle when
the glue gun start to work, check if the glue gun are heating;
gun can not be heated, there are following reasons:
Plug cord into electrical outlet not
Glue gun has been destroyed owing to
inner cord short circuit;
gun can be heated, there are following reasons: Nozzle has been stopped by any
impurity, ask careerman to manage it.
5. Do not use the glue gun
under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle
or melted glue;
7. Do not remove out the melted glue stick from
the tunnel back side, it will damaged the glue gun as well as scalding person
8. Do not to disassemble or assemble any glue
gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it
beyond any of Children palpable side;
10. Only used for melting glue stick, no other
11. When in use, there are any glue flow back
from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use
after 15 minutes;
Before use the glue gun, check
if the plug cord into electrical
2ï¼Ž When glue gun
in first use, the heating element will have small smoke, it is normal
situation, but the smoke will disappeared after 10 minutes;
3ï¼Ž After power,
not for a long time in standby mode(not longer for 20 minutes), when the
suspension of use, unplug first.
4ï¼Ž Avoid to use
the glue gun under very hot or very cold environments.
5ï¼Ž Better not
work under direct cold wind blowing, it will reduce efficiency and loss power
6ï¼Ž When in
continuous using, do not press the trigger with great pressure, and try to
squeeze out the un-melted glue, it would damage the glue gun
applicable for bonding heavy objects or objects needed strong adhesive
8ï¼Ž The quality
of glue stick will directly influence the glue gun function and sticking
9ï¼Ž If the
power cord is damaged, do not replace it by yourself, must ask for
professionals to replace it.
10ï¼Ž This tools must b e placed in its position when
not in use. And storage before the tools complete cooled.
11ï¼Ž Be careful when using any other electrical appliance
with flammable material.
12ï¼Ž Not applicable for a long time in the same
13ï¼Ž Do not use an explosive gas atmospheres.
14ï¼Ž Note that heat may be the line of sigh, combustible
15ï¼Ž Do not leave equipment unattended when switched
16ï¼Ž This appliance is not intended for use by
persons(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
17. Children should be supervised to ensure that
they do not play with the appliance.
1. Glue gun
using voltage is 110-220V AC,50/60Hz;
2. Tip gun
forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm
(mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks
tunnel at back of gun
4. After power,
wait for 5-10 minutes to allow glue to soften
After glue softens, squeeze
trigger to feed glue through glue barrel. Excessive force will damage glue gun.
Put down nozzle after work, disconnect the power plug
Mini Glue Gun
10W Mini Glue Gun, Mini Glue Gun, Small Glue Gun, Electric Glue Gun
Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com